Water pressure can cause issues with the irrigation system depending on if it is too high or too low. If the water pressure is too low, it could cause the sprinklers to not water the correct distance, or some sprinklers to not water depending on how many heads you have attached to the zone. If…Read More »
Author Archives: josh
If you are using multiple B-hyve timers, and want to use smart watering with each of them, then you will need to adjust the smart watering program for each device. In order to do this, you will need to add a “Suggested Start Time” for the smart watering on your B-hyve devices. Be sure to…Read More »
Product Part Number Zones Application Hub Max Connections Installation 21004 21830 21005 1 Above-Ground Watering Gen 1 16 Outdoor 24511 24516 1 Above-Ground Watering Gen 2 16 Outdoor 24632 24537 2 Above-Ground Watering Gen 2 16 Outdoor 24634 54539 4 Above-Ground Watering Gen 2 16 Outdoor 57915 57925 4 8 Under-Ground Watering 1.0 Internal Hub…Read More »
While both generations of the B-hyve Indoor/Outdoor timers look almost identical, they have 2 main differences. You can tell the difference by looking at the PROG button on the timer. If it says ABC, it’s a 1st-Gen and the ABCD is the 2nd-Gen. The letters stand for how many programs can be created. The second difference…Read More »
If you are looking for the model number on your Orbit device, then this article should help with finding that. Most of our products will have the model number located somewhere on the device, so be sure to check whatever product you have to see if the model is available. Another option for finding the…Read More »
To create a program from the Indoor/Outdoor B-hyve timer, you’ll need to set the start times, run times, and the frequency of the program. Set the Start Time Turn the dial until the selection box is on Start Time Press the dial. You will now see 1st Start Time in the display Press the dial…Read More »
Privacy Policy INTRODUCTION Orbit Irrigation Products LLC. (“Company” or “We”) respect your privacy and are committed to protecting it through our compliance with this policy. This policy describes the types of information we may collect from you or that you may provide when you visit the website (http://www.orbitonline.com and subsidiary sites) (our “Website”) and our…Read More »
If you are looking for help with finding the MAC address for your B-hyve device, then this article will help you. Each of our B-hyve devices has a unique 12 digit MAC address associated with them. For each of the different devices, this MAC address is located in a different spot. The MAC addresses on…Read More »
Here’s a helpful video for creating a Smart Water program from your phone!! Need to program your timer but you’re not sure where to start? We’d be happy to show you how to create programs! In the app, use the Navigation bar at the bottom to navigate to the “Zones” page. Tap the Zone you wish to…Read More »
All of us from Orbit® would like to thank you for choosing the Daybreak timer. You have made a smart decision and we are sure that you are going to love this product! Your timer has two unique ways to be set: USING THE DAYBREAK SIDE Choose to water Every Day or Every 2 Days…Read More »