How to factory reset your B-hyve device
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device.
Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router changes and need to get your device reconnected, or are having frequent disconnection issues. Clicking the links that are next to the instructions can help with making sure that you pair your device correctly.
For all B-hyve devices, factory resetting will also put the device in pairing mode. If you already have your device programmed, then performing this step could clear any custom programming that you have set up.
|Device Name||Device Picture||How to Factory Reset||Support Article Link|
|B-hyve Indoor/Outdoor Timer||Open the front door, then open the swing panel. Locate the reset button. Press and hold the reset button for 10-12 seconds.||Pairing your indoor/outdoor B-hyve controller|
|Indoor Timer||Press the middle B-hyve Button 5 times rapidly||How to pair your B-hyve indoor smart watering timer|
|B-Hyve XR||Press the middle B-hyve Button 5 times rapidly||How to pair your B-hyve XR indoor/outdoor smart watering timer|
|B-hyve XD, 2 station, and 4 station||Rotate the dial to the off position, then press in on the dial and release. Now, press and hold the dial-in for about 10 seconds, or until everything on the display lights up.||Pairing your B-hyve XD (Bluetooth only)|
|B-hyve Hose Faucet Timer||Press the B-hyve button 5 times rapidly||Pairing your B-hyve hose timer and hub|
|B-hyve Hub/Gen2 B-hyve Hub||Press the B-hyve button 5 times rapidly||Pairing your B-hyve hose timer and hub|
|B-hyve Flood Sensors||Flip the device over and then press the yellow B-hyve Logo/Button 5 Times||How to pair your B-hyve Smart Flood Sensor and hub|
Beside each of the device’s instructions, are videos on pairing each of the devices, but if that doesn’t resolve your issue, we recommend checking out the following articles for additional support for your B-hyve devices:
– How to Resolve Frequent Disconnections with your B-hyve Smart Timer
– My timer is not finding any Wi-Fi networks
– How to reconnect your B-hyve timer after a change to your home network
– I’ve connected my hub, but I can’t find it on my devices list
– Gen 2 B-hyve Indoor/Outdoor timer not finding the OrbitSmartHomeNetwork
Should you have any other questions, or if these steps/articles don’t address your concerns, please reach out to our Customer Care team by clicking here.Back to Support page
Tags: b-hyve, controller, factory-resetreset, timer