Pairing The B-hyve Hose Faucet Timer to an Existing WiFi Hub

The following video goes over how to connect a B-hyve Hose timer to an existing B-hyve WiFi Hub on your B-hyve account.

Before starting this pairing process, you should download and run the OrbitAssist application using the steps found here to make sure your WiFi network is configured to work best with the B-hyve Hub. You will then want to make sure that your timer is in pairing mode (while in pairing mode, the timer’s LED light on the front will be blinking blue). If this light is not blinking blue, press the B-hyve button located to the left of the LED 5 times. This should factory reset the timer, and put it into pairing mode.

If that does not work, please try removing the battery tray from the timer, and then replacing the batteries, and trying the factory reset again. (be sure to make sure that your battery try is fully inserted into the timer in order to prevent water from getting into the body of the timer.