Community Home Community B-Hyve Indoor/Outdoor Timer Scheduled watering using 5 zone index valve does not switch zones Reply To: Scheduled watering using 5 zone index valve does not switch zones

#1989
Ryan
Participant

Hello OTownGator, To wire your indexing valve using jumper wire you would need out 12 station timer.
However there is another way to program, and wire it which I find a little easier. For the wiring part all you would need to do is have the one wire in com and the other in terminal 1. Then for programming you would need to make 2. they will need to be exactly the same other than the start times, and you will need a 1-5 min delay for the indexing valve to have time to rotate to the next line.

example
Program a start times: 1) 7AM 2) 7:10AM 3) 7:20AM 4) 7:30AM Run time just for station 1 9min (just so there is that one min delay) how often is mon-fri
program b start time: 1) 7:40AM Run time just for station 1 9min how often is mon-fri

So it just needs to look something like that. The run times need to be the same on both programs and only for station 1. Then for how often both programs need to be the same. Then you need 5 start times total in-between both programs. with some form of 1-5 min delay.

let me know if you have any other questions.

Spread the love!