Community Home Community B-Hyve APP Forum Rain Delay Functionality Reply To: Rain Delay Functionality

#3246
Ryan
Participant

@[email protected], everything seems to be ok looking from our end. If it wont work because of a rain delay/sensor you will need to check the rain sensor mode. If you do not have a rain sensor hooked up the jumper cable needs to be inserted in the sensor terminals, also the sensor mode needs to be switched to off. To make sure it is off go to your actual timer, and make sure it is in auto mode. Then hold down the rain delay button until either sensor off or sensor on appears. Which ever one appears means it just switched into that mode.

Spread the love!