Don’t have the app on your phone handy? No worries. B-hyve HT25 Smart Hose Faucet Timer Press and hold the B-hyve button for three seconds. Release the button when the LED blinks green for 2 seconds and your manual watering will begin. Default watering time will be 10 minutes (duration set in the Device Details…Read More »
Tag Archives: bhyve-faucet
To help address this, I’d like you to try removing the battery tray, wait 30 seconds, and then reinsert it, making sure the tray is fully inserted. You’ll want to complete this step with the faucet turned off or the hose timer removed from it, to ensure water doesn’t get into the body of the…Read More »
I understand that water isn’t flowing from the Hose Timer even though a program is running. To help address this, I’d like you to try removing the battery tray, wait 30 seconds, and then reinsert it, making sure the tray is fully inserted. You’ll want to complete this step with the faucet turned off or…Read More »
Sometimes your timer can leak from the connection to the faucet, and other times it can leak near the outlet, where you connect your hose. Here are a few things you can try to resolve this leak. This can be caused by the washer located in the inlet of the device. First, ensure that the…Read More »
If you have a B-hyve Hose Timer that is not working, this guide should help you. This is often the result of water intrusion. While it is connected to a source of water, the Hose Timer is water-resistant, not waterproof. We do recommend immediately removing it from the faucet should it become non-responsive, opening the…Read More »
If your timer disconnects often, and you find yourself unplugging it to re-connect frequently, this is the article for you. There are a couple of steps you can take that may resolve the issue. First, please download and install the OrbitAssist application on your phone or tablet using the steps found here. Using the OrbitAssist application,…Read More »
The minimum GPM is 2.5 and the maximum GPM is 9. For more information on our Orbit and B-hyve hose timers, please see this Article. Back to Support pageTags: bhyve-faucet, hose-timer
The PSI should be between 10-100. Anything Below 10 PSI and the controller will likely not turn on, and anything above 100 PSI could damage the controller or cause it to not turn off. Back to Support pageTags: bhyve-faucet, hose-timer, psi
If your B-hyve hose timer is showing that is in the OFF mode, then this article should help with that. If this is happening, then the most likely cause would be that the battery is low. The B-hyve hose faucet timer will usually turn itself to OFF when the battery reaches anywhere from 20-30%. This…Read More »
If your B-hyve Hose Timer is frequently disconnecting from Bluetooth, then this article should help with that. The B-hyve hose timer has a Bluetooth range up to 150 feet, but this can be lower if there are any walls, floors or anything else that might disturb the signal in between you and your hose timer. If…Read More »
- 1
- 2