Updating Wi-Fi Settings Reconnecting your timer to your Wi-Fi network. If your timer has lost connection to your Wi-Fi network, or you’ve changed routers/internet providers, the timer will need to be reconnected to the router. Put your timer into “Pair Mode” by rotating the dial to “off” and pressing the reset button (located inside the swing…Read More »
Tag Archives: Pair
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to help identify and solve the problem. If you are saying the following: “I can’t connect to my Hub” “My flood sensors have gone offline” “I’m having trouble pairing with the Hub”…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to the most relevant article to help identify and solve the problem. If you are saying the following: “I can’t connect to Wi-Fi / Bluetooth” “I’ve changed my Internet provider / Router…Read More »
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »
If you have just purchased a B-hyve timer/Hub or our B-hyve Flood Sensors and Hub and have any questions or need help with setting up your new B-hyve products then this guide will help. First things first, you will want to download the B-hyve app on either the App Store or Google Play Store depending on which phone/tablet you are using…Read More »
B-hyve is now compatible with Guardian devices, and this article will walk you through the connection and use of these devices. First off, you will need to make sure that both your b-hyve device and your Guardian devices are connected. Click Here for B-hyve Support Click here for the Guardian Support Page Once both devices…Read More »
There are several different B-hyve devices, and not all of them are put into their pairing mode the same way. This article will show you how this is done for each device. Putting your timer in pairing mode is very important when initially pairing your device to the B-hyve app, but it can also assist…Read More »
If you have a Flume device, you can now connect it with the B-hyve controller. With the B-hyve & Flume integration, you will be better able to understand how much water is being used for irrigation and determine if there are any potential leaks in the system. The initial integration will allow you to view…Read More »
This article will walk you through pairing your B-hyve XD timer to your Wi-Fi Network. A couple of things you need to know before pairing: You will need a Gen 2 Hub in order to pair, the Gen 1 hub for the B-hyve hose timers will not work with the B-hyve XD. If you’re attaching…Read More »
This article will walk you through pairing your B-hyve XD Hose Faucet Timer. A couple of things you’ll need to know before we get started: This is pairing for Bluetooth only. Click here to be directed to Wi-Fi Pairing Using Bluetooth only, you won’t have access to features such as “Smart Watering” and “Automatic Rain Delays” In…Read More »
- 1
- 2