Tag Archives: program

How to program the B-hyve Indoor/Outdoor timer at the device

To create a program from the Indoor/Outdoor B-hyve timer, you’ll need to set the start times, run times, and the frequency of the program. Set the Start Time Turn the dial until the selection box is on Start Time Press the dial. You will now see 1st Start Time in the display Press the dial…Read More »

Getting started with B-hyve

If you have just purchased a B-hyve timer/Hub or our B-hyve Flood Sensors and Hub and have any questions or need help with setting up your new B-hyve products then this guide will help. First things first, you will want to download the B-hyve app on either the App Store or Google Play Store depending on which phone/tablet you are using…Read More »

How to program your timer

If you are looking for help with programming your Orbit or B-hyve timer, then this article should help. This article contains links to both our Orbit and B-hyve line of timers and will help you in programming your device to fit your needs. Please check below to find an article to fit your needs. *Note:…Read More »

Can I transfer programs to a new timer

Currently, there is no way to transfer programs from one timer to another timer using any of our devices. If this was something you wanted to do, we recommend writing down the programs you currently have, exactly as you have them (or make any changes you see fit), and then proceed to set up your…Read More »

Programming Basics

Want to take full advantage of your underground sprinkler timer?  This may be the guide for you.  What are stations and zones? A station or zone refers to a group of sprinklers attached to the same valve.  Your timer will turn on the valve to let water flow to the sprinklers in that zone/station.  The…Read More »

Advanced Programming B-hyve XD

The Advanced Programming in your B-hyve XD will give you more control over the program your timer runs.   Basic Programming vs Advanced Programming The basic program only allows an interval schedule with one start time, whereas Advanced programming will allow up to 4 start times a day, and you can water-specific days, odd/even days,…Read More »

How to Program Your Indoor Smart Timer

Need to program your timer but you’re not sure where to start? We’d be happy to show you how to create programs. Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separate from the rest…Read More »

How to Program Your Hose Faucet Timer

To set up Custom Watering Custom programs can be found from any screen with the bottom navigation bar. Tap the “Programs” navigation button. You’ll now see the programs screen with three empty program slots (A, B, & C) or any saved custom programs if previously set. Press “Tap to set” to begin creating your custom programs. I’m…Read More »

How to Program your B-hyve Indoor/Outdoor Controller

Need to program your timer but you’re not sure where to start? We’d be happy to show you how to create programs. Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest…Read More »

How To Program Your XR Indoor/Outdoor Smart Timer

Need to program your timer but you’re not sure where to start? Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest of your stations. For example; Your grass may need to…Read More »