My station won’t turn on. How to troubleshoot a valve There are a few different possible causes of your stations not turning on. Your water may not be turned on. If you have a master valve, manually open that and then try running the timer again. If you have a pump, make sure that is…Read More »
Tag Archives: Wiring
Many systems will have a master valve or a pump that needs to be turned on to allow the water to get to your valves. You should have two wires coming off of this valve/relay. One wire will go to the terminal labeled Pump, and the other wire will go into the common (C). Note: Any…Read More »
Our relay is an “open circuit” electric switch that is used to connect high voltage (120/240 VAC) from a high voltage source to a pump or other high voltage circuit. The relay/switch is operated (turned on) by connecting a 24 VAC source to the two blue wires connected to the relay coil. Most timers do…Read More »
- 1
- 2