- This topic has 6 replies, 2 voices, and was last updated 2 years, 5 months ago by .
Viewing 7 posts - 1 through 7 (of 7 total)
Viewing 7 posts - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-hyve Smart Hose Faucet Timer › 32 day manual rain delay won't clear
Tagged: Manual Rain Delay
Logged into the app and found both my timers have a 32day manual rain delay.
I tapped on the X to clear the rain delay but it will not clear.
Have tried everything but it will not clear.
I am able to manually water but the timers will not run in auto.
Hello ebkruse01, go ahead and try connecting to your timers via Bluetooth you should then be able to delete the rain delay. Also could I have the mac address of one of your devices? That way I can take a look at your system, and push any available updates. Thank you!
Hose timers are
44:67:55:11:0E:42
44:67:55:10:DF:AC
Wifi module is
44:67:55:20:7C:65
Thanks.
Ok, your hub’s firmware has been updated. Please connect to your timer via Bluetooth to disable your rain delay. If a message stating that your timers settings are off please power cycle your timer and reestablish your bluethooth connection to save your settings/programs. Once you’ve done that you can connect your timer back to the Wi-Fi bridge/hub.
I can not seen to get either timer to connect via bluetooth. Is there a way to default them?
Ok. Power cycled phone. Now bluetooth is working.
Everything is clear now and appears to be working. Thanks.