- This topic has 6 replies, 2 voices, and was last updated 2 years, 7 months ago by .
Viewing 7 posts - 1 through 7 (of 7 total)
Viewing 7 posts - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-Hyve APP Forum › App stuck showing zone 1 active with zero time remaining
Tagged: stuck zone 1 zero time
Hi,
I originally added this as a comment on an existing thread, but it might get more attention as a new thread.
My B-hyve ran for the first time this morning and I found the app stuck showing zone 1 active with zero time remaining although the display on the B-hyve showed the actual active zone and time remaining. After the B-hyve finished watering, the app was still stuck showing zone 1 active with zero time remaining. I was able to reset the app to match the B-hyve’s actual status (including updating the next watering time and watering history) by hitting the stop watering button in the app. Almost feels like an app or API problem rather than a firmware problem, but it can’t hurt to update the firmware. Can you update it for me? The MAC address is 44:67:55:02:CB:D6. Thanks!
P.S. – Self-service firmware updates would be a nice feature.
your timer us up to date now.
Thanks! I’ll check the app when the system runs on Wednesday morning.
The firmware update did not resolve this problem.
Try power cycling and also resetting your timer. after that then update your Wi-Fi settings and see if that resolves your issue.
So far so good after power cycling the timer.
Ok, just let us know if you need any other assistance.