Community Home Community B-hyve b-hyve 4 station WT24-0001 seems to stuck/fozen in powering on

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #81308
    saimbhi
    Participant
    Points: 1
    Up
    0
    Down
    ::

    Hi,

    It keep on displaying “b” and “8” on the led. Not sure why its not connecting. Tried to hard-reset and reboot but its still stuck in the same state.

    Firmware Version: 0051
    Hardware Version: WT24-0001
    Wi-Fi Version: 0

    #81368
    JDoyel
    Participant
    Points: 7
    First Time
    Up
    -1
    Down
    ::

    I haven’t seen that before but I’ve seen other digital devices freeze during boot-up and the cause is often a poor connection. Look for any cables that can be re-attached in the main part of the timer.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.