- This topic has 1 reply, 1 voice, and was last updated 7 months, 1 week ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-Hyve APP Forum › B-Hyvw app states all is working fine
SO the app states when I turn to water a zone manual it will launch normal and countdown timer till start. But no water will ever come out of the heads. Now I have tested all 6 zones and I have the same issue. I have reset the controller and I have also turned off water sensor and still no manual water.
Looking at the Zone History that I have had issues with it only turning on for 1 sec and then off around June 5th across the 6 zones.
Luckily we have had some showers now with no rain and just the heat we are starting to see the plants having heat issues Out come the hoses and spikes for watering until we can figure out what is actually going in.
MAC Address 44:67:55:03:5D:60
Station 8 (6 setup)
Firmware Version: 0039
Hardware Version: WT25G2H-001
MAC Address 44:67:55:03:5D:60
Station 8 (6 setup)
Firmware Version: 0045
Hardware Version: WT25G2H-001
Got the update but the issue has still not corrected.
I am unable to get any water to come out of the any zones even though the app states that the flow is current