- This topic has 2 replies, 3 voices, and was last updated 2 years, 3 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-hyve Smart Hose Faucet Timer › Battery Usage doesn't work
My timer kept showing “off” and i could not get it to go to auto, so I finally power cycled the timer. After I did, my battery monitor dropped from showing 85% to 9% and the timer still would not let me set it to “auto”. I then replaced the batteries, and the timer started working correctly. However, the battery still shows 9%. I really don’t want to power cycle the timer continuously to get correct battery information. It seems that this must be a software flaw.
Hello vmw55, could you please provide my with your timers mac address so I can take a look at your timer? Also try connecting to your timer via Bluetooth, to see if the issues continues as well. Thank you.
I just bought 2 of these timers (bluetooth) and both of my battery level meters show 0%, it flashes 100% really quick once I connect to the timer but then quickly shows 0%