Community Home Community B-Hyve APP Forum BHyve not watering

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #4170
    [email protected]
    Participant

    My BHyve is not watering as scheduled and I am fairly sure that I have all smart watering features turned off. I have to use the manual function at this point

    Spread the love!
    #4209
    jfrier
    Participant

    I have the same issue. Smart watering turned off, schedule is set, b-have reports that it has performed the scheduled watering but it’s not actually happening. Running manually works fine.

    Spread the love!
    #4220
    Ryan
    Participant

    Hello, could I have both of your timers mac addresses to take a look? thank you!

    Spread the love!
    #4225
    jfrier
    Participant

    No problem,

    Mac address: 44:67:55:02:9A:39

    Let me know if you need anything else

    Spread the love!
    #4234
    Ryan
    Participant

    @jfrier, I’ve taken a look at your system, and everything seems to be in order. it may be that your timer’s rain sensor is set to the wrong mode. At your actual timer unit you will want hold down the rain sensor button, while it is set to auto. after about 5-10 seconds you will see either sensor off or on. Indicating which mode your timers was just set to. If you don’t have a sensor it needs to be set to off, and if you do have on it needs to be set to on. Please check this, and let me know if your issue continues.

    Spread the love!
    #4288
    jfrier
    Participant

    @Ryan, I’ll see if it waters tomorrow, but I do not have a rain sensor and when I did as you instructed, it showed as off.

    Spread the love!
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.
Spread the love!