- This topic has 0 replies, 1 voice, and was last updated 10 months ago by .
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-Hyve APP Forum › Booster Pump Recommendation
Tagged: pump booster-pump long-run
I need to add an inline booster pump to my irrigation system.
This is my Orbit Model info:
Stations: 12 (3 set up)
MAC Address: 44:67:55:06:98:43
Firmware Version: 0039
Hardware Version: WT25G2-0001
I am using 3/4″ schedule 40 class 200 for the long runs. My main run (coming from my well and that is 1 inch ched 40 480psi) before the T is about 50 ft. After it goes into my valve box I have a run that is about 40 ft (all class 200) before it hits my sprinklers. The sprinkler run is using Rain Bird T63-500S Drip Irrigation 1/2″ (0.634″ Blank OD) and is about another 60 – 70 ft. I am using these drip sprinklers . By the time it reaches the end it is barely dripping out as you would imagine.
I knew I was going to need a pump, but was hoping someone could suggest something I can hook up to my orbit to power on before it goes into the valve system. I would like something that would self prime, I would imagine.