Community Home Community B-hyve Underground Feature Requests

Tagged: ,

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #79511
    ajobaan007
    Participant
    Points: 4
    First Time
    Up
    3
    Down
    ::

    Post your product feedback and feature requests here

    #79512
    ajobaan007
    Participant
    Points: 4
    First Time
    Up
    3
    Down
    ::

    When using “Water Manually”, after selecting all the zones and durations, it would nice to be able to be able adjust the order of the zones.

    Attachments:
    You must be logged in to view attached files.
    #79515
    DanMarshall
    Participant
    Points: 3
    First Time
    Up
    0
    Down
    ::

    I wish that I could designate a “budget” for each month of the year. For example I might designate budget of 15% in December and 100% in June. Budget is designated by program. My understand that budget reduces the amount of time each zone is on, for a particular program.
    Here is an example of how things would work if this change were implemented:
    I have a Program called trees that turns on once a week. It has only one zone, which is a drip line around all of the trees.
    If I designated a budget of 15% in December and 100% in June for the Trees Program, then the tree zone would run for 30 minutes once a week in June, and 4.5 minutes once a week in December

    #79537
    mcasteel
    Participant
    Points: 3
    First Time
    Up
    2
    Down
    ::

    I would like to be able to access a calendar merged from all of my controllers, so as to see watering activity/plan for my entire property at once.

    #79540
    stuartemarshall
    Participant
    Points: 3
    First Time
    Up
    2
    Down
    ::

    Need more sensitivity to the climate in California. After several days of 100F weather, plants are wilting and I don’t see B-hyve stepping up the irrigation enough.

    #79550
    LFreck6
    Participant
    Points: 3
    First Time
    Up
    0
    Down
    ::

    Please bring back the ability to adjust the amount of seconds to water each zone. This was a feature a couple weeks ago but it was changed in the update. It’s nice to have seconds for seeding lawns. Thanks

    #81171
    kharmon
    Participant
    Points: 3
    First Time
    Up
    0
    Down
    ::

    Where I am located, it is prohibited to water your lawn during a rain event and for 48 hours after same rain event. I would like the ability to customize the length of the rain delay after a rain event is triggered.

    #81172
    travis.reinert
    Participant
    Points: 3
    First Time
    Up
    0
    Down
    ::

    Having had my B-hive power supply die and having to replace it, it would be nice to be able to transfer all the programming to a new unit. Having to do this manually is ridiculous when a simple program transfer for like units should be an easy task. I also lost all my nice zone pictures and now it is winter and everything is dead… not very good pictures 🙂

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.