Community Home › Community › B-Hyve APP Forum › firmware update
Tagged: Firmware Update
- This topic has 120 replies, 61 voices, and was last updated 1 year, 10 months ago by
Stephen.
-
AuthorPosts
-
June 11, 2018 at 7:19 pm #3065
gregdconsulting
ParticipantRyan, I see that my firmware is updated to v. 32. In the web UI home screen I still see Rain Delay, there is no rain forecast. I click Remote and try to run an existing program of Lawn. The web UI shows that the timer is running and the zone is supposed to be on. The sprinkler is not activating. I don’t think my programs are running either. I can manually activate the zones individually using the remote feature. It appears that my timer is stuck in Rain Delay mode and then not watering anything.
Spread the love!June 11, 2018 at 8:44 pm #3069Ryan
ParticipantI’ve Checked your system and see no signs of a rain delay. At the homepage of the app does it show rain delay or clear delay? If it shows the rain delay button with the little clock logo then a delay is not set. Also is it showing a delay on your actual timer screen? As a clarifying question your timer does water when you do a manual watering then?
Spread the love!June 11, 2018 at 9:02 pm #3079gregdconsulting
ParticipantOK, I was misunderstanding the Rain Delay icon.
When I manually run an existing program, the UI says the program is running, but it isn’t. Also in each zone I have it set to run 10 minutes, but the timer starts at 9:10 minutes and counts down. Watering budget is set at 100%.
I deleted my existing Program C, and the created it again with the same results.
When I manually run zones one at a time, that works.
Spread the love!June 11, 2018 at 9:32 pm #3088Ryan
ParticipantIf I could I have the mac address for your timer then I can take a look at it. Thank you.
Spread the love!June 11, 2018 at 9:38 pm #3096gregdconsulting
ParticipantRyan, This is a continuation of our conversation about my timer not manually running programs, and maybe not running scheduled ones.
MAC Address: 44:67:55:02:0b:c3
Firmware Version: 0032
Hardware Version: wt25-0001Spread the love!June 12, 2018 at 1:57 pm #3124P Loga
ParticipantWhat does the firmware update actually do (re: 6 station B-Hyve)? I don’t see any difference between the DEBUG-0010 and firmware update 0023.
Spread the love!June 12, 2018 at 3:29 pm #3130joshbish
ParticipantPlease update the firmware for my two devices. Indoor timer 44:67:55:40:15:1C, and Faucet Timer 44:67:55:10:1D:B8. They are linked together as a device group and both have internet connectivity. Thanks!
Spread the love!June 12, 2018 at 3:31 pm #3131Kent
ParticipantMAC Address: 44:67:55:40:13:c4
Firmware Version: DEBUG-0013
Hardware Version: WT24-0001Can i get a firmware update
Spread the love!June 12, 2018 at 5:42 pm #3140Ryan
Participant@ Kent & joshbish, your firmware is now up to date.
Spread the love!June 12, 2018 at 6:11 pm #3151joshbish
ParticipantI see the firmware has been updated for the Indoor Timer but the Faucet Timer still shows the same firmware, 32. Would you mind trying that one again?
Spread the love!June 12, 2018 at 6:31 pm #3160Ryan
Participant32 is the most up to date firmware version for faucet timers.
Spread the love!June 12, 2018 at 6:43 pm #3163Kent
ParticipantFirmware Version: 0018
Thanks RyanSpread the love!June 13, 2018 at 2:39 pm #3213donmurphycanada
ParticipantIs there release notes online somewhere? I am wo dering if homekit is now supported? Also is there a manual way to upgrade my firmware from the ap?
Spread the love!June 13, 2018 at 7:55 pm #3233Ryan
Participantdonmurphycanada, apple home kit is not yet available. However out timers are compatible with google smart home, and Alexa.
Spread the love!June 17, 2018 at 6:20 pm #3453hexc0de
ParticipantMAC address: 44:67:55:40:6E:26
Firmware Version: DEBUG-0013
Hardware Version: WT24-0001Please update my firmware. Thanks.
Spread the love! -
AuthorPosts
- You must be logged in to reply to this topic.