Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4207
    farnes
    Participant

    Program won’t run, works fine on with manual settings. Says I have a rain sensor delay, though I don’t have a rain sensor. Smart watering off.

    44:67:55:02:7e:e5

    Spread the love!
    #4321
    Ryan
    Participant

    Hello farnes, Your firmware is up to date, and everything else seems to be in order regarding you timer. If it’s saying your program didn’t run because of a rain sensor even though you don’t have one, it is most likely because your timer is set to the incorrect sensor mode. To fix it you’ll want to set your timer to auto, and then at the actual timer hold down the rain delay button. eventually you will see either sensor off or sensor on. Which indicates which mode your timer was just set to. You will want it to be set to the off position. Please let me know if you need any help with this, and have a great day!

    Spread the love!
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.
Spread the love!