- This topic has 5 replies, 3 voices, and was last updated 2 years, 8 months ago by .
Viewing 6 posts - 1 through 6 (of 6 total)
Viewing 6 posts - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-Hyve APP Forum › Improvements on rain delays
Tagged: Rain Delay, zones
Does anybody know if it is possible to « isolate » one zone from the rain delays? I have one zone that is under a porch and never sees rain. I know how to set the rain delay threshold but it applies to all stations.
Thanks,
Hello fcaron, I’m sorry there is no way to isolate a particular zone for a rain delay. Currently it only sets the delay for the device as a whole. However manual waterings are unaffected by rain delays. so if that one zone needs water while there is a rain delay set you could just water it through the manual setting. Thank you!
Thanks Ryan,
Any ways to pass the request to the programmers? this should be easy to implement!
Just add a “deactivate rain delay” checkbox on zones or programs…
Regards,
Your welcome, and I’ll be sure to pass up your suggestions as well!
Maybe it is possible to create a separate program for that one zone and turn off the rain delay or adjust accordingly? I’m new to this system but am learning.
Thanks PSTREICHER, I actually tried pretty much everything, including what you are suggesting, and the rain delay really applies to the whole system. I was proposing the same solution to the developers: either add a different rain delay per zones or program or have a checkbox to apply the rain delay or not to a zone or program. I think this should be pretty easy to program so I’ll keep checking on app updates!