Community Home Community B-Hyve Indoor/Outdoor Timer New System Firmware Update

Tagged: 

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • #4119
    eyeloot
    Participant

    @Ryan Just installed a new controller. I see that the Firmware is a Debug Version. I noticed some strange things on the first automatic/custom run this morning. I think it may be related to changing the program after it started running. One of the stations was on but didn’t show as running in the app. I had removed that station from the program an hour earlier. Once that station finished the app showed the running station again.

    Please update my firmware so I have the latest stable version.

    MAC Address: 44:67:55:02:7f:a3
    Firmware Version: DEBUG-0010
    Hardware Version: WT25G2-0001

    Spread the love!
    #4124
    Ryan
    Participant

    @eyeloot, your firmware is now up to date. Please let us know if you need any other assistance.

    Spread the love!
    #4169
    robertolito
    Participant

    Can you update my firmware too? MAC is 44:67:55:00:05:9A
    Also, I cannot find the link to start a new post here. Can you tell me, please?
    Thanks

    Spread the love!
    #4172
    illumifi
    Participant

    @Ryan

    My bhyve is watering a lot. For my front lawn zone. The watering schedule adjustment page recommends 5 days between watering’s for this time of year.
    The scheduled run time for smart watering is (4x)19 min.
    Smart watering ran on the 30th,28,27,25,24,17,15,13,11,10,9,4 and 2nd for this month
    It tried to run on the 29th but I issued a 48 hr rain delay even tho it wasn’t raining because my lawn is soggy.
    so I was surprised when it was running this morning on the 30th.

    Please update my firmware.
    MAC Address: 44:67:55:02:D3:D9
    Firmware Version: DEBUG-0010
    Hardware Version: WT25G2-0001

    Spread the love!
    #4174
    eglpilot
    Participant

    My Bhyve is not getting firmware updates even though connected to wifi.
    Please update the following.

    MAC 44:67:55:03:45:F9
    Firm Version: DEBUG-0010
    Hardware: WT25G2-0001

    Spread the love!
    #4240
    Ryan
    Participant

    @robertolito, I’ve updated your firmware. to add a new forum topic just scroll down to the bottom of the page. Then in the Create New Topic in “forum group” add a title, write a comment, and then just select submit.


    @illumifi
    & eglpilot, I’ve updated your firmware.

    please just let us know if you have any other issues.

    Spread the love!
    #4243
    steverexfg
    Participant

    Do we all have to request update for each time this way? why can’t they just update….I have 9 timers…

    Spread the love!
    #4322
    Ryan
    Participant

    Hello steverexfg, no it shouldn’t be necessary to have to ask. They send out updates when there’s a new firmware version and periodically. So as long as your timer is connected to the internet when the updates are pushed your timer will update. You only need to ask us for one if you notice that your timer is having issues. Then we can check to see if your firmware is up to date, or if it’s another issue. Only our hose faucet timers need to be updated manually, and can be done in the device details page. Please let us know if you need any other assistance.

    Spread the love!
    #5021
    pblamber
    Participant

    My Bhyve is not getting firmware updates even though connected to wifi.
    Please update the following.

    MAC 44:67:55:40:06:32
    Firm Version: DEBUG-0013
    Hardware: WT24-0001

    Spread the love!
    #5080
    Ryan
    Participant

    Hello pblamber, your timer’s firmware is now up to date.

    Spread the love!
    #15952
    robertolito
    Participant

    I HAD TO UNSUBSCRIBE TO THE TOPICS IN THE FORUM DUE TO THE CHINESE SPAM. PLEASE, MODERATORS, STOP THE CHINESE SPAM SO WE CAN USE THIS FORUM NORMALLY

    Spread the love!
    #18114
    giogabsa
    Participant

    Hi there, my system is not updating, can you check and update the firmware please?

    Mac 44:67:55:01:08:7A

    Thanks.

    Spread the love!
    #64435
    Josh Wheeler
    Keymaster

    GIOGABSA

    I have update your timer’s firmware.

    Thank you!

    Spread the love!
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.
Spread the love!