- This topic has 2 replies, 2 voices, and was last updated 2 years, 7 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-hyve Indoor Underground Timer › Overwatering, Waters every day Soil Moisture Stuck at 0% after smart watering.
MAC:44:67:55:40:65:15
My smart watering now has issues. Every night it waters. the first three zones say the begging balance is 0.00, the irrigation says +0.00 the ending balance it 0.00; even though it runs zones 7-8 minute twice. It has been doing this for the last few weeks.
The other bhyve I have set up on the fromt yard seems to work as expected MAC 44:67:55:40:5F:B3. waters about twice a week it adds to irrigation, and adds to the ending balance.
Ken
A_CAD_1
I have updated the firmware on that one controller, Rear Yard, and set it to recalculate the smart program.
You can also use the App to set the Moisture Balance to something you think is closer to the actual by going to the Zones screen the tapping on the zone to update. Once there tap on the moisture balance bubble and then adjust it up. I don’t recommend doing this every day or too often as it forces the smart process to recalculate for your timer and can cause some things to get out of wack. But once in a while when you see things are off is fine.
Please keep us posted and if we need to we’ll dig deeper into it for you.
Thank you!
Looks like it is all working now. Thank you