Community Home Community B-hyve B-hyve App Program performance

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #79444
    Bob Stein
    Participant
    Points: 7
    First Time
    Up
    3
    Down
    ::

    I have a Bhyve 6 sta controller. I have programmed all the zones to come on twice a day running 2 zones back to back. The app notifies me when the program runs but when I check the watering history I get different results. When it should run at 6AM and 8PM the history only indicates it ran at one time. When both zones are to run it often says only 1 zone ran. When the zone should run for 10 min it shows it ran for 8min. Not sure what to believe re: what is actually happening. Any advice? I’m 900 miles away so it’s not easy to check. Last yr Customer service was very helpful. This year it’s hard to talk to them.

    #79517
    Bill_H
    Participant
    Points: 5
    First Time
    Up
    0
    Down
    ::

    Like you I have been 1200 miles away. Thankfully I have cameras that I can use to verify runtimes. I’ve also used a browser to look at and or confirm the app data.

    #79545
    Bob Stein
    Participant
    Points: 7
    First Time
    Up
    0
    Down
    ::

    Don’t know how this page is supposed to work but it is not allowing responses to the responses.????

    #79546
    Bob Stein
    Participant
    Points: 7
    First Time
    Up
    0
    Down
    ::

    What kind of response is this?
    Error: Slow down; you move too fast.
    Error: Your reply cannot be created at this time.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.