Tagged: 

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #2596
    ginobonilla
    Participant

    Hello, I have a permanent rain delay on my unit and the system will not allow me to clear. This is incredibly frustrating. How can I solve this problem?

    Spread the love!
    #2620
    Ryan
    Participant

    Could I please have the mac address to your timer? Thank you. Also do you have a rain sensor installed?

    Spread the love!
    #2628
    ginobonilla
    Participant

    mac 44:67:55:02:0C:77

    I do have a rain sensor though it is not connected. I disconnected it shortly after installing the Orbit unit because I thought the unit was able to accurately read the forcast.

    Spread the love!
    #2657
    Ryan
    Participant

    Everything seems to fine with your timer looking from our system. However if you disconnected your rain sensor you will want to make sure the sensor is turned off, other wise it won’t water and act like you mentioned a permanent rain delay. Just have your timer in to auto mode and hold down the rain delay button at the timer until sensor off appears.

    Spread the love!
    #2669
    ginobonilla
    Participant

    hello Ryan, did that exact thing yesterday based on some of the other comments in the forum, though I’m still having the same issue. Is there a way to reset the unit?

    Spread the love!
    #2675
    Ryan
    Participant

    If you’ve disconnected the sensor you still need that little jumper that was in both sensor terminals at first purchase (or a makeshift one if you don’t have it anymore). You could try a factory reset by putting the timer into off mode and holding down the reset button for about 10 seconds (until your screen display shows everything at once). you could also try deauthorizing your device and re-pairing it. If you have any further issues after that please contact our product support tam either by email or phone.

    Spread the love!
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.
Spread the love!