- This topic has 7 replies, 3 voices, and was last updated 2 years, 6 months ago by .
Viewing 8 posts - 1 through 8 (of 8 total)
Viewing 8 posts - 1 through 8 (of 8 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-Hyve APP Forum › Smart Watering App Bug?
Anyone else have an issue with the app where when smart watering in running, the home screen is stuck on zone 1 and it looks like it is done with zero seconds left? The water controller operates fine and runs all zones as schedule. The app status just shows the same thing the whole time. The countdown ring is full and doesn’t move.
Hello zsgeagle, could I please have your timers mac address? It could possibly need a firmware update.
MAC Address: 44:67:55:00:80:c1
Firmware Version: 0032
Hardware Version: wt25-0001
Wi-Fi Version: 1.4.0
Hello zsgeagle, Just letting you know your timer’s firmware was already at the current version. What app version are you currently using? What you may want to try is factory resetting your timer, unplugging your ribbon cable for 5 seconds, and then update your Wi-Fi settings. If your issue continues after that please let me know.
Ryan, thanks for checking. I am always on the most recent app updated version, 1.7.26. I refuse to think this is the controller issue, as it runs fine. THis is an APP issue, and the fact that several others are seeing this issue proves that. I really don’t want to reset everything on my end for nothing
Ryan. Logged into web version instead of app while the controller was running this morning. It behaved normally as the app USED to. The home screen shows the current zone countdown as well as future zones scheduled and the wheel was not full. So another indication that the Apple app version has a bug. Please report and have this fixed for us. Thank you.
zsgeagle, hank you for you feedback, I’ll be make sure to report your issue. Please let us know if any other issues occur.
Looks like we have two threads on this topic.
FYI, my android device is showing the wheel status fine but my iOS app is not. Seems this is an iOS app problem.