::
I am trying to get Smart Watering operating on all 8 zones on the system. One specific zone never schedules watering even though the moisture level shows as 0.0. For simplicity, I’ve uniformly set up advanced settings virtually identically for soil type, slope, sunshine hours etc.
The zone in question is very small with a single rotor.
I have used manual watering and the zone shows moisture. But it soon depletes to 0 based on plant usage and still won’t water. All other zones appear to be working with regular watering, varying times to keep moisture levels in a range.
Strangely, when I watered the zone for 10 minutes, it indicated 33% moisture. When I tried to give it another 10 minutes using Test, it would not run.
By the way, I have set the application rate (AR) for each zone based on area (derived from a GIS area calculation) and a measured flow rate from a Flume sensor.