Community Home Community B-Hyve Indoor/Outdoor Timer Temperature Not Displaying

Viewing 15 posts - 16 through 30 (of 32 total)
  • Author
    Posts
  • #3071
    Ryan
    Participant

    If you open your bhyve app go to settings> B-hyve account> change units from metric to imperial.

    Spread the love!
    #3153
    BDWilson
    Participant

    I have the same problem. I have set the zipcode for my B-hyve, however the temperature does not display on the home page of the iPhone app.

    My controller has the MAC Address: 44:67:55:02:91:57

    Spread the love!
    #3157
    Ryan
    Participant

    @BDWilson, your firmware is now up to date.

    Spread the love!
    #3655
    bhyveuser2018
    Participant

    Hi, I am having same issue, temperature not displaying on upper right corner of home page. I have firmware updated to 0032 and full address entered. Please take a look. Thank you.

    MAC address: 44:67:55:01:F5:15

    Spread the love!
    #3669
    Ryan
    Participant

    You could try updating your Wi-Fi settings. If it still doesn’t appear it should then be fixed in the next app up date coming out shortly.

    Spread the love!
    #3831
    amusedtodeath
    Participant

    Ryan,

    Can you also update my firmware? 44:67:55:01:d3:50

    Thanks!

    Spread the love!
    #3840
    Ryan
    Participant

    @amusedtodeath, your firmware is now up to date.

    Spread the love!
    #3846
    tommyjohnrice
    Participant

    44:67:55:40:60:26

    Can you update my firmware?
    Should the version be: DEBUG-0013 ?

    Spread the love!
    #3855
    Ryan
    Participant

    Tommyjohnrice, your firmware is up to date.

    Spread the love!
    #3875
    bhyveuser2018
    Participant

    Issue resolved, thank you.

    Spread the love!
    #3929
    ard.jason
    Participant

    Hello,
    I am unable to get the temperature to update within the application for about a month now. I have updated address, rest WiFi connection, and re-downloaded the application. I am still unable to get my current weather station to finish updating. It is and has been stuck on loading weather station since I have received the device.
    MAC: 44:67:55:02:D6:A0
    Firmware: 0023
    HW: WT25G2-0001

    Spread the love!
    #4009
    Steven
    Participant

    Please make sure that you are using the most recent version of the bhyve app. If you continue to experience an issue please call our product support line for direct assistance.

    Spread the love!
    #4661
    [email protected]
    Participant

    Same issue. Temp not displaying on IPHONE APP, and when it be smart wagering is runnning, it shows zone 1,
    0 seconds left no matter which zone is running and no matter how much time is left. MAC ID= 44:67:55:01:18:48

    Spread the love!
    #4778
    Ryan
    Participant

    @[email protected], your firmware was already up to date. Could you please check that your using the most current app version. You may also want to try unplugging your timers ribbon cable for 5 seconds, and then update your Wi-Fi settings. There is not much else we can do from here outside of the firmware so if you continue to have problems please contact our product support line.

    Spread the love!
    #5787
    Chip Sawdust
    Participant

    Just spent half an hour in the phone with Jeff, who actually got all but one of my problems solved. New 6-zone timer just installed yesterday, so the firmware needed an update which is done. Temperature wasn’t showing up, and I was unable to select any weather stations. Jeff’s supervisor selected one for me and that showed up, then others showed up as well, so I selected one closer to me.

    Having waited a while now, I still don’t show the temperature even though a weather stations shows being selected. Can’t do any “smart” watering without a weather station. Is there something I’m missing?

    Spread the love!
Viewing 15 posts - 16 through 30 (of 32 total)
  • You must be logged in to reply to this topic.
Spread the love!