- This topic has 3 replies, 3 voices, and was last updated 2 years, 6 months ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-Hyve Indoor/Outdoor Timer › The LED screen on the b-hyve is Flashing on and off
Hello,
my unit led display is flashing on and off and also, not able to connect to my unit. I’ve tried powering it on and off, reseting the unit and still having the same issue. Can you help me figure out what I’m doing wrong.
Mine was doing the exact same now the screen just goes blank. When this happens it does not water my lawn. Just returned from vacation to a dead lawn. If I tap on the side of the screen it starts working but only for a day or so.
Here is my current information.
Last Connected: Jul 9, 2018, 5:31:48 PM
Stations: 12 (9 set up)
MAC Address: 44:67:55:00:74:8a
Firmware Version: 0031
Hardware Version: wt25-0001
Wi-Fi Version: 1.3.1
Hello everyone, If your timers LCD screen is going out you can try factory resetting your timer, unplugging the ribbon cable for 5 seconds, power cycling your timer, and trying a different outlet. If that doesn’t work you will need to contact our product support line to verify for a warranty replacement, as your device could be defective. Please let me know if you have any other questions, or need any other assistance.