Community Home Community B-hyve Hose Faucet Timer Not Working

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #81388
    HappyLawn
    Participant
    Points: 4
    First Time
    Up
    0
    Down
    ::

    While the app shows both the timer and Wi-Fi Hub is “connected”, the timer does not function (i.e. “click”) when selecting Water Manual. When trying to water manual, it times out and provides an error message “Your timer didn’t respond within 30 seconds. Please make sure it is powered on and connected over Wi-Fi or Bluetooth.” NOTE- the timer blinks a light blue color every 2 seconds or so. I’ve not seen this color signal before. The timer worked well last summer; just trying to set it up for this spring/summer season. Any suggestions? Thank you.

    Attachments:
    You must be logged in to view attached files.
    #81392
    lcc014
    Participant
    Points: 21
    First Time
    Up
    -1
    Down
    ::

    According to the “Device Help” page in the app (My-Bhyve –> Help –> Device Help), “Flashes Blue every 2 seconds for 10 minutes” is “Unprovisioned”. To fix this issue, “To start again, pull battery or factory reset (push on/off button 5x)”.

    #81397
    HappyLawn
    Participant
    Points: 4
    First Time
    Up
    -1
    Down
    ::

    Thank you. I’ve already followed the “pull battery” (the push on/off button 5x doesn’t seem to work). Any other suggestions?

    #81423
    TryingToFixThings
    Participant
    Points: 7
    First Time
    Up
    0
    Down
    ::

    When I had the unprovisioned error, I had to re-add the device by clicking on the plus sign. The new device entry simply overwrote the old one probably because the Mac addresses matched. My device re-ran calibration and the rest of setup.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.