Tagged: Auto not working
July 22, 2018 at 3:54 pm #5020
I have two schedules programmed into my bhyve device and the sprinkler system isn’t going off when scheduled. I’ve scheduled it for 0500 and 2200. Here is my MAC address:
44:67:55:03:49:41. My Firmware Version is DEBUG-0010.
Any help you can provide would be appreciated. Thank you.
JoshSpread the love!July 23, 2018 at 6:58 pm #5078RyanParticipant
Hello jccoke85, I’ve updated your firmware for you. Just wondering if this issue is a recent one, or if it’s occurred since instillation. Are you able to use manual watering’s? Also You may want to try creating a test program just to make sure that your scheduled watering’s will work. Please let us know if you need any other assistance.Spread the love!July 24, 2018 at 2:18 am #5120
My Bhyve is now offline and will not turn back on. It was online this morning.
The program issue has been happening since the moment we installed it and turned it on.
JoshSpread the love!July 24, 2018 at 2:44 am #5121
Just to be clear, the unit itself is completely off and will not turn back on.Spread the love!July 24, 2018 at 3:27 am #5122sgriffin555Participant
Hi, my timer stopped working. I have the physical timer set to “auto” but every time in try to turn on a program in the App, it turns on then turns right off. I can manual run section and do tests but programs will not stay on.
Firmware:0025Spread the love!July 25, 2018 at 4:26 pm #5156ShuggabooParticipant
Hello, I’m new to the b.hyve family. I’m struggling to get my smart watering set up the way I want it be. I’m only using smart watering because I want the rain delay to work automatically. My yard has an incline but it’s not that steep or high up from the road. Must of my yard is level. I have two zones set up. Zone 1 is for the flower beds with annual flowers and shrugs. I have 4 mist heads for this zone that sprays. Zone 2 is for the lawn. I have 2 rotating sprinkler heads for this zone. I live in Hephzibah GA. I’m not sure what type of soil I have. I really have more sprinkler heads and mist head than I need. Ideally I want to water my lawn (Zone 2)every other day at 5:00 am for 5 mins and again at 8:00am for 5 mins. I want (Zone 1) to water everyday 4 times a day starting 6:00am for 3 mins each times, with the last watering at 6:00pm. Can you please check my settings and update my firmware if needed and give me any advice on how to achieve what I need. Thank in advance.
MAC address: 44:67:55:03:58:F4
Firmware: DEBUG-0010Spread the love!July 25, 2018 at 6:16 pm #5169RyanParticipant
Hello jccoke85, please call our product support line for further troubleshooting with an agent.
sgriffin555, I’ve updated the firmware for your timer, and now you shouldn’t have any issues enabling your programs.
Shuggaboo, I’ve updated your firmware for you. Also if you have smart watering enabled for your device it will set the automatic rain delays for your custom programs. So you can turn it off smart watering for each individual zone, and go back to using your custom programs. This way you can water everything exactly how you’d like it, while still receiving the automatic weather delays.Spread the love!January 18, 2020 at 7:04 pm #78348sgroiwesParticipant
Hello, my program for two zones keeps immediately turning off after I turn it on. It will not stay on. Please help. Thank you. Wes
Firmware: 039Spread the love!
- You must be logged in to reply to this topic.