Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #692
    JohnnyB
    Participant

    I am replacing my current timer with the B-Hyve 6 valve controller. I have one Common wire on my current controller but the B-Hyve has two terminals marked with ‘COM’. Which terminal should be used (to the right or left of the numbered terminals)?

    Spread the love!
    #700
    Justin
    Keymaster

    Hey JohnnyB,
    You can use either terminal.

    Spread the love!
    #2324
    dmacindoe
    Participant

    My question is related. My existing timer has one COM connection with two wires attached to it … one COM wire is the same gauge as the zone wires, the other COM wire is a smaller gauge. The bhyve timer has two COM connections. How should I connect the two COM wires to the bhyve’s two COM connections?

    Spread the love!
    #2333
    jcello
    Participant

    I am replacing my current Orbit Control Star Timer with a b-hyve. I have 2 questions:

    1, There are 2 com ports on the Control Star and each has a wire coning out of it. Which COM ports on the B-Hyve do I connect them to.

    2. How do I wore the Orbit External Rain Sensor to the unit?

    Spread the love!
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.
Spread the love!