- This topic has 1 reply, 2 voices, and was last updated 2 years, 7 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Spread the love!
Community Home › Community › B-hyve Smart Hose Faucet Timer › Two Faucet Timers – only one running programs
I purchased one timer/hub combo and one additional timer. Since installing, only on timer has been running automatic programs, the other does not. All settings on the timers are identical, except for the program start times. I can still initiate a manual water from my phone so I know it’s not a connectivity issue. I’ve seen a lot of posts on this and it appears there is a firmware update for the hub? If so, please advise on how to update the firmware.
Hub: 44:67:55:20:6D:AF
@krusso, I’be updated your firmware. If the issue continues try connecting to Bluetooth. you might get a message that says something about the time being off. If that shows power cycle your timer. You will need to reconnect to the timer via Bluetooth again.
If it still isn’t working set the program through Bluetooth instead of reconnecting to Wi-Fi.