Community Home Community B-hyve Hose Faucet Unable to connect WIFI Faucet timer and Hub

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #82116
    orbitericcom
    Participant
    Points: 5
    First Time
    Up
    0
    Down
    ::

    I was able to setup the Faucet timer with Bluetooth on my iPHone but it is notm reflected on my iPAd because I am unable to make a WiFi connection. The only option that comes up is Bluettooth. The Small plugged in hub nevertheless shows a blue blinking light.

    Anyone with a solution? Thank you

    #82118
    SHAMS
    Participant
    Points: 5
    First Time
    Up
    0
    Down
    ::

    If you are running multiple frequencies on your router for wifi like 2.4GHz, 5GHz, 6GHz, or 6e GHz. Check to make sure the iPad is connected to the same Wifi frequency 2.4 Ghz and not connected to ant other frequency.

    #82120
    orbitericcom
    Participant
    Points: 5
    First Time
    Up
    0
    Down
    ::

    Thanks for your suggestion. I finally began to comprehend the process. My iPhone connected via Bluetooth to the faucet timer. Yet my iPad does not, yet they are both on the same network 2.4. I was able to set up that small plugin WiFi hub and connect it to my iPad Orbit app.
    But, I have no idea how to program the faucet timer. I am using the Orbit app, which has all my programs for the sprinklers and drip irrigation. I cannot find a way to program the faucet timer via the wifi hub. No options appear in the app.

    Any suggestions? Thanks again for taking the time to,trespond. Eric

    #82121
    orbitericcom
    Participant
    Points: 5
    First Time
    Up
    0
    Down
    ::

    Thanks for your suggestion. I finally began to comprehend the process. My iPhone connected via Bluetooth to the faucet timer. Yet my iPad does not, yet they are both on the same network 2.4. I was able to set up that small plugin WiFi hub and connect it to my iPad Orbit app.
    But, I have no idea how to program the faucet timer. I am using the Orbit app, which has all my programs for the sprinklers and drip irrigation. I cannot find a way to program the faucet timer via the wifi hub. No options appear in the app.

    Any suggestions? Thanks again for taking the time to,trespond. Eric

    #82136
    doenau
    Participant
    Points: 4
    First Time
    Up
    0
    Down
    ::

    I had this same issue. My phone would find the wifi hub and attempt to connect it. After selecting the WiFi network for it to join, it would continue but then time out and say that the wifi hub could not connect to the internet.
    I tried all the usual resetting etc a million times. Eventually, when setting up the WiFi, I de-selected the ‘DHCP’ option for the networking and configured a static IP address etc. This seemed to resolve the issue for me.
    I am not 100% confident this resolved it (there were still some odd things going on), but at least it is another option for users seeing this thread to try.

    #82138
    orbitericcom
    Participant
    Points: 5
    First Time
    Up
    0
    Down
    ::

    Thank tou. Meanwhile air have my Orbit app connected to Faucet timer but zo have no idea how do add a program into the air it app. Maybe I need to send a different post

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.