May 23, 2018 at 1:51 pm #2145
I’ve got Firmware: 0032
Timer is in full Smart Auto water mode.
No weather info.
No programs scheduled.
Address is set correctly.
Can no longer get TEST to work over wifi. I get a timeout.
Faucet Timer MAC: 44:67:55:10:54:40
No blue lightbulbs.
Help!Spread the love!May 23, 2018 at 5:49 pm #2153
I played with Settings->Devices->Faucet Device->Weather Adjustments->Current Weather Station. I had changed it to a Personal Weather Station (from the Airport, which I assume is a government run weather station) and it was working at least a week ago because I wanted more local rainfall data (3.3 miles vs. 11.5 miles). Weather was working from that one, but my guess is perhaps the government ones work more reliably. When I wasn’t getting current weather in the app, switching back to the airport one “fixed” that for me in the app and the beta web site.
So perhaps what I’d like to request is the ability to configure 2 (or perhaps more) weather stations with an implicit priority. I want to get data from one of the personal weather stations, unless it’s down. Otherwise, I’d like to default back to the airport. Or something like this. That way I can get resiliency as well as more localized rainfall and predictions.
I still have no schedule for my smart watering. :-/
I should also add that it would seem that the my full auto smart watering actually claimed to fire off a while back, it got recorded in the app as a manual water event. I’ve never actually seen any irrigation event in the app say it was anything other than manual after the fact in the schedule.Spread the love!May 23, 2018 at 8:33 pm #2167
Thank you for all of your feedback. As of right now you have a next watering set. If you continue having issues where it says the server is taking to long and doesn’t respond I suggest re-pairing your timer (push the bhyve button rapidly 5 times in a row to enter pairing mode).Spread the love!May 23, 2018 at 8:34 pm #2168
More playing. I connected via Blue Tooth and was greeted with a message saying the clock was off by a day. So apparently it lost connection without indicating so in the app. Tried to update the firmware. But it would appear I have 0032 which is the latest.
I think my WiFi connection may have been re-established in the process. We’ll see.
Another oddity happened just a second ago. The timer triggered for 15 seconds and turned off. It did it again after that as well. I think it’s done now. Unusually test for 15 seconds so perhaps these are tests that finally worked through the system.Spread the love!May 24, 2018 at 5:50 am #2184atkayeParticipant
Having the same issue please reply mac address: 44:67:55:02:CB:B0Spread the love!May 24, 2018 at 2:48 pm #2188
System seems to have stabilized nicely and now it appears to be working normally scheduling (and executing) automatic events with water sense at the times it said it would.
I had thought that this might have fixed the issue with Alexa giving the wrong times (GMT) in her replies, but now I think that still isn’t working.Spread the love!May 24, 2018 at 6:53 pm #2201May 25, 2018 at 6:09 am #2206atkayeParticipant
Ryan, I’m still not picking up any local weather stations. The app is stuck loading weather when I go to it in the settingsSpread the love!May 25, 2018 at 5:56 pm #2237
Is it switched on so the yellow is showing on the slide bar? If your looking for a specific station you’ll want to make sure it is registered under the pws site, or else it will not appear.Spread the love!May 25, 2018 at 6:13 pm #2244bhyvegilfordParticipant
My app also no longer shows the weather on the top right corner.
MAC Address: 44:67:55:00:70:29
Firmware Version: 0032
Hardware Version: wt25-0001
Wi-Fi Version: 1.3.1
Worked fine until the server issue a few weeks back. Re-entered my address and chose another weather station to try to kick start, but no luck.Spread the love!May 25, 2018 at 6:25 pm #2246
try re-entering in your whole address, city and street included. Also you may want to update your Wi-Fi settings.Spread the love!May 26, 2018 at 9:43 pm #2279bhyvegilfordParticipant
Hi Ryan. I paired again and updated the wifi and address. No change. Weather is still missing top right of the app. ThanksSpread the love!May 27, 2018 at 4:20 am #2286jwbanks10Participant
Hello, my weather also doesn’t show. Mac: 44:67:55:00:3D:3F
Can you advise? Thanks!Spread the love!May 27, 2018 at 10:01 pm #2295ForestJohnParticipant
Thank you for updating my firmware. But, my time is still off by several hours and my weather shows just a zero. The sprinklers are coming on at the proper time but the app shows the watering times to be off by several hours. I would appreciate any kind of help you could give me with this issue.
My MAC address is 44:67:55:02:CF:57
Thank you very much.Spread the love!May 27, 2018 at 10:03 pm #2296ForestJohnParticipant
Regarding my post above, the time indicated is off seven hours. Even the time of my email sent to you is off seven hours. That would be showing seven hours ahead. Thank you very much.Spread the love!
- You must be logged in to reply to this topic.