Community Home Community B-Hyve Indoor/Outdoor Timer Zones water for less than 1min.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #3805
    kylefaulk
    Participant

    My zones water for less than 1 minute when they run. Both smart water zones and manual zones do this. If I test the zone and set a desired time it runs fine.

    MAC: 44:67:55:02:85:87

    Thanks!

    Spread the love!
    #3822
    Ryan
    Participant

    So it’s doing this for your custom and smart watering programs, but not your manual watering’s? Do you have a rain sensor hooked up? Also is your timer in the correct sensor mode (off if you don’t have a sensor on if you do)?

    Spread the love!
    #3848
    kylefaulk
    Participant

    I don’t have any sensor installed and I’m guessing the mode would be the factory setting. I will check it this evening when I get home.

    Spread the love!
    #3856
    Ryan
    Participant

    To check the sensor mode set your timer to auto then hold down the rain delay button (on the actual timer). Either sensor off or on appears. Which ever one shows up is the mode it just entered. Let me know if you have any other questions.

    Spread the love!
    #3907
    kylefaulk
    Participant

    This seems to have taken care of the issue. Thanks for the help

    Spread the love!
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.
Spread the love!