Community Home Community B-hyve B-hyve App Connecting to the Hub?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #81757
    willinak
    Participant
    Points: 7
    First Time
    Up
    1
    Down
    ::

    When I initially set up the B-Hive, it went perfect. Everything connected and worked. I did an update and everything went to hell. I cannot connect to the Hub, and or reset it. Any ideas welcome!

    #81807
    gkissell
    Participant
    Points: 20
    First Time
    Up
    1
    Down
    ::

    This is worth a try, if you are still stuck.

    Disconnect hub from power. Press and hold the B button while re-connecting power to the hub. After a couple seconds of power, release the button.

    The light may continue to flash yellow, give it a minute. Then remove from power and plug back in. Give it a minute or two, press the B button five times to go back to pairing mode.

    Make sure you have removed the hub from your account before trying to add it back in.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.