Community Home Community B-hyve B-hyve App iPhone App Pair issue fixed

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #81555
    BCAZ1327
    Participant
    Points: 11
    First Time
    Up
    0
    Down
    ::

    There are two ways of pairing from the app to a bhyve timer: 1)by setting the device to “off” then press the reset button and 2)by pressing and holding the reset button for 12 seconds.

    The #2 option is what I did and it worked. Your timer cannot be running an active program and your display will light up will all displayable icons and numbers display and the WiFi and Bluetooth icons will begin to “scan”.
    It’s at this point where you want to use your app to reconfigure..

    #81754
    willinak
    Participant
    Points: 7
    First Time
    Up
    0
    Down
    ::

    Did this work for Wifi as well?

    #81755
    willinak
    Participant
    Points: 7
    First Time
    Up
    0
    Down
    ::

    Did this work for Wifi as well? I can reset the hose timer, but cannot connect to or reset the hub, which previously worked fine (pre update).

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.