Community Home Community B-hyve Manual and programmed watering stops before timer runs out

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #81762
    jp136049
    Participant
    Points: 1
    Up
    0
    Down
    ::

    All smart watering and rain delays are off. Have the 4 Port XD and a wifi hub. No connectivity issues, but any way I start watering, weather programmed or manual, stops after only minutes. I get a notification that the watering has stopped. I cannot get any zones to water for the amount of time I specify. Have even tried running the manual watering from the “test” mode. Nothing seems to make any difference. My watering history just shows random (low minute, sometimes seconds) run times. When I called Orbit about this, they just said it was because I was only using the XD through bluetooth connection. They said once I got a wifi hub, it would work fine. That is definitely not the case. Seems others have experienced this issue on reddit and other boards. One person even said they returned their’s to the store, and the exchanged one worked fine.

    I have un-installed and reinstalled the app, restarted the phone,reset devices.

    #81769
    lhelander
    Participant
    Points: 3
    First Time
    Up
    0
    Down
    ::

    Mine started last week – All programs were running fine for months & months, now all of a sudden it only runs 1 station (out of 13) and stops. It also stops partially through a manual program.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.