Community Home Community B-hyve Hose Faucet Multiple Hubs

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #81895
    kevindwill
    Participant
    Points: 1
    Up
    4
    Down
    ::

    Is it possible to install multiple hubs on a single wifi network? Specifically, I started with a Gen 1 timer device with a gen 1 hub. Trying to add a Gen 2 (XD) device, it became obvious I needed a Gen 2 hub. I was told by Orbit support that the Gen 2 hub would control Gen 1 devices, but after purchasing the new hub, it won’t work wit the Gen 1 device. I see the only option to be having both hubs installed, but only one seems to be able to be active.

    #81912
    michaelccc
    Participant
    Points: 3
    First Time
    Up
    0
    Down
    ::

    Having same issue. Just got my Gen2 hub online and it sees my XD just fine but doesn’t seem to work with my original Gen1 device. Quite disappointing and hoping there is just something I missed. The last thing I want is two hubs.

    #82200
    chipito
    Participant
    Points: 6
    First Time
    Up
    0
    Down
    ::

    Gen 1 devices only connect to Gen 1 hubs.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.