Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 7, 2023 at 3:20 pm in reply to: 4-Port Timer Only fires 3 of 4 Zones #81761
    Alcphoto
    Participant
    Points: 8
    First Time
    Up
    0
    Down
    ::

    I failed to mention I deleted all programs and started again. Also DO NOT manual water for testing purposes from the scheduled programs zones.
    I find the manual watering over rides the schedule or corrupts things.

    Delete al your programs.
    Reset connections.
    Pull batteries.
    After screen fades out press both buttons at least 5 times each.
    Replace batteries.
    Setup up your programs again. See if they run. Mine did.

    To test for aiming patterns and the like just tap zones. Then tap a zone, tap the word “test” in the top right corner. You will get the how long option, choose and test. Tap the word “stop” in the top right corner to stop. Don’t wood pecker it. just get a good tap ans wait.

    June 4, 2023 at 7:23 pm in reply to: 4-Port Timer Only fires 3 of 4 Zones #81741
    Alcphoto
    Participant
    Points: 8
    First Time
    Up
    1
    Down
    ::

    Fixed. Pulled batteries, watched the screen die out, then tapped both buttons multiple times. All four zones fire now.

    June 4, 2023 at 7:20 pm in reply to: I have a hub, but can only connect via bluetooth #81740
    Alcphoto
    Participant
    Points: 8
    First Time
    Up
    0
    Down
    ::

    If wifi is 5hz it will not. Swap to 2.4hz.

    June 3, 2023 at 2:34 pm in reply to: Gen 1 Faucet Timers compatibility with Gen 2 Wi-Fi Hub #81721
    Alcphoto
    Participant
    Points: 8
    First Time
    Up
    0
    Down
    ::

    Copy. It wasn’t more than 5 days ago my Gen2 Wifi hub took an update. Could have been a old one.

    June 3, 2023 at 12:38 pm in reply to: Gen 1 Faucet Timers compatibility with Gen 2 Wi-Fi Hub #81715
    Alcphoto
    Participant
    Points: 8
    First Time
    Up
    -1
    Down
    ::

    If you are using 5GHz wifi change it to 2.4GHz

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)