B-Hyve XD Rain Delay

Rain Delay – Rain delay allows you to postpone your watering schedule for a set period of time (These steps are applicable to all 3 models of the B-hyve XD). To access the rain delay feature at the timer, follow the steps below.

  1. With the timer in AUTO mode, press and hold the dial for 3 seconds.
  2. The rain delay icon will appear and the number slot will begin to flash.
  3. Turn the dial until the desired amount of time to delay the watering is displayed, then press the dial to confirm the selection.
  4. The display will flash between the current time and how long until the rain delay ends.

To remove a rain delay, press and hold the dial for 3 seconds. The rain delay icon will turn off and your timer will resume its programmed watering schedule.

Once you set the Rain Delay using the timer, if you wanted to make any changes to the delay from the app, as long as the timer is connected via Bluetooth or WiFi then you will be able to cancel the rain delay from the app. You will not be able to edit the existing delay, so if you cancel it you would need to create a new one.

Please click here for an article on how to create a Rain Delay within the B-hyve app.

Back to Support page
Tags: 24511, 24632, XD