In this video, we will be onboarding an Orbit B-hyve XD Timer. This video applies to all XD timers available, including the one-port, two-port and four-port timers. In this demonstration we will be using a four-port XD timer. We will go through the entire process of adding the timer to your B-hyve app, adding a…Read More »
Tag Archives: XD
Low battery on the B-hyve hose faucet timers, will result in your timer turning itself to OFF automatically, being unable to turn it back to AUTO, and not allowing it to go into pairing mode. If you notice that your hose timer is perhaps not running the schedule you scheduled it to run, then it…Read More »
If you have a B-hvye XD or the B-hyve hose faucet timer, and are unable to activate smart watering on your device, then this article is for you. The most likely reason that you are unable to turn on smart watering is that your timer is not connected to your home WiFi. In order for our B-hyve hose…Read More »
If you are looking for help with programming your Orbit or B-hyve timer, then this article should help. This article contains links to both our Orbit and B-hyve line of timers and will help you in programming your device to fit your needs. Please check below to find an article to fit your needs. *Note:…Read More »
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »
The Advanced Programming in your B-hyve XD will give you more control over the program your timer runs. Basic Programming vs Advanced Programming The basic program only allows an interval schedule with one start time, whereas Advanced programming will allow up to 4 start times a day, and you can water-specific days, odd/even days,…Read More »
Programming at the unit itself: You can program this timer without any connection to the app. You will simply use the dial to select your settings. Set Clock – This is the current time of day Rotate the dial to the “Set Clock” position, and then press in on the dial. Rotate the dial to the…Read More »
Programming at the unit itself: You can program this timer without any connection to the app. You will simply use the dial to select your settings. Set Clock – This is the current time of day Rotate the dial to the “Set Clock” position, and then press in on the dial. The hour will begin to…Read More »
Programming at the unit itself: You can program this timer without any connection to the app. You will simply use the dial to select your settings. Set Clock – This is the current time of day Rotate the dial to the “Set Clock” position, and then press in on the dial. The hour will begin to…Read More »
Manual/Hand Watering – This feature allows you to water without interrupting your programmed watering schedule (these steps are applicable to all three versions of the B-hyve XD). To access this feature, follow the steps below. With the timer in AUTO mode, press the dial once quickly to access the MANUAL feature. Manual will appear on the…Read More »
- 1
- 2