Programming Your B-hyve XD 4-Outlet Without an App

Programming at the unit itself:

You can program this timer without any connection to the app. You will simply use the dial to select your settings.

  1. Set Clock – This is the current time of day
    1. Rotate the dial to the “Set Clock” position, and then press in on the dial. The hour will begin to flash
    2. Turn the dial until the current hour is displayed including the correct AM or PM, then press the dial to confirm the selection. The minutes will begin to flash indicating the next step in the process.
    3. Turn the dial until the current minutes are displayed, then press the dial to confirm the selection.
  2. Start Time – This is the time of day you’d like your system to turn on.
    1. Turn the dial so the arrow is pointing to START TIME.
    2. Verify zone 1 is selected, noted by the zone number on the display. To switch zones, press the zone button.
    3. Press the dial to confirm the selection, the time slot will begin to flash.
    4. Turn the dial until the desired start time hour is displayed including the correct AM or PM, then press the dial to confirm the selection. The minutes will begin to flash, indicating the next step in the process.
    5. Turn the dial until the desired minutes are displayed, then press the dial to confirm the selection.
  1. How Long  This is the amount of minutes this system will run
    1. Turn the dial so the arrow is pointing to HOW LONG.
    2. Press the dial to confirm the selection, the time slot will begin to flash.
    3. Turn the dial until the desired number of minutes are displayed. Press the dial to confirm the selection.

How Often – This setting is the interval between watering days. Note: 7 days means it will water once every 7 days, not every day of the week.

  1. Turn the dial so the arrow is pointing to HOW OFTEN.
  2. Press the dial to confirm the selection, the number slot will begin to flash.
  3. Turn the dial until the desired interval is displayed, then press the dial to confirm the selection.

Programming Zones 2-4

  1. Turn the dial so the arrow is pointing to Start Time.
  2. Press the Zone button to select the zone you want to program.
  3. With your zone now selected, repeat the steps for Start Time, How Long, and How Often

AUTO MODE

  1. Turn the dial so the arrow is pointing to AUTO/MANUAL.
  2. Press the dial to confirm the selection, the arrow will stop flashing and you are now in AUTO mode.

If you would like to water on specific days of the week, you will need to download the B-hyve app and use the “Advanced Programming” option instead.
Click here if you would like to use “Advanced Programming”