Programming Your B-hyve XD without an app
Programming at the unit itself:
You can program this timer without any connection to the app. You will simply use the dial to select your settings.
- Set Clock – This is the current time of day
- Rotate the dial to the “Set Clock” position, and then press in on the dial.
- Rotate the dial to the current hour, take note of the AM and PM setting. Press the dial to accept that hour.
- Rotate the dial to the current minutes. Press in on the dial to accept those minutes.
- Start Time – This is the time of day you’d like your system to turn on.
- Rotate the dial to the “Start Time” position on the timer, then press in on the dial.
- Rotate the dial first to select the hour of day. Please note the AM and PM. Press in on the dial to accept the hour
- Rotate the dial for the minutes you’d like to run. If you want it to start at the top of the hour (e.g 3:00 AM), press in on the dial with the time at 00.
- Press in on the dial again to accept the start time.
- If your timer has multiple outlets, press the Zone button to swap to the next zone, and repeat the steps above.
- How Long – This is the amount of minutes this system will run
- Rotate the dial to the “How Long” position on the timer, then press in on the dial.
- Rotate the dial to the amount of minutes you’d like your system to run (Anywhere from 1 to 240 minutes).
- Press in on the dial to accept that run time.
- If your timer has multiple outlets, Press the zone button to swap to the next zone, and repeat the steps above
- How Often – This setting is the interval between watering days. Note: 7 days means it will water once every 7 days, not every day of the week.
- Rotate the dial to the “How Often” position
- Select your interval. You can run every 1, 3, 6, or 12 hours or once every 1-7 days.
If you would like to water on specific days of the week, you will need to download the B-hyve app and use the “Advanced Programming” option instead.
Click here if you would like to use “Advanced Programming”
Tags: 24511, 24632, 24634, programmingXD