In this video, we will be onboarding an 8-station Orbit B-hyve Indoor Sprinkler Timer to the Orbit B-hyve app. Before plugging in your timer, you will need to wire in the power transformer using the provided flathead screwdriver. Do not connect the power transformer to your main power before wiring it into your timer…Read More »
Tag Archives: Indoor
Below is a video that will walk you through the set up of a traditional watering program in the B-hyve app. How to set up a Smart Watering program in the B-hyve App Devices Covered: 57946, 57950, 04080, 04082, 57915, 57925, 04060, 57985, 57995, 21005, 21205, 04138, 24511, 24632, 24634 Back to Support pageTags:…Read More »
If you are looking for help with finding the MAC address for your B-hyve device, then this article will help you. Each of our B-hyve devices has a unique 12 digit MAC address associated with them. For each of the different devices, this MAC address is located in a different spot. The MAC addresses on…Read More »
If you are looking for the model number on your Orbit device, then this article should help with finding that. Most of our products will have the model number located somewhere on the device, so be sure to check whatever product you have to see if the model is available. Another option for finding the…Read More »
If you are using multiple B-hyve timers, and want to use smart watering with each of them, then you will need to adjust the smart watering program for each device. In order to do this, you will need to add a “Suggested Start Time” for the smart watering on your B-hyve devices. Be sure to…Read More »
Disconnect the wire from station 2 when 4 is running. If 4 stops, replace the timer, if not, it’s a crossed wire. Back to Support pageTags: Indoor, Indoor/Outdoor, Troubleshooting, Underground Timer, Valve, Wiring, zone
Need to program your timer but you’re not sure where to start? We’d be happy to show you how to create programs! What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separate from the rest of your…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to the most relevant article to help identify and solve the problem. If you are saying the following: “I can’t connect to Wi-Fi / Bluetooth” “I’ve changed my Internet provider / Router…Read More »
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »
If you are looking for help with programming your Orbit or B-hyve timer, then this article should help. This article contains links to both our Orbit and B-hyve line of timers and will help you in programming your device to fit your needs. Please check below to find an article to fit your needs. *Note:…Read More »