Our Orbit pressure-regulated sprinklers have a date code that indicates when the sprinklers were made and tested. The marking can be found on the bottom of the sprinkler and consists of two numbers on either side of an arrow that indicates the year. The arrow points to the month and is shown as numbers, corresponding…Read More »
Tag Archives: pressure
Water pressure can cause issues with the irrigation system depending on if it is too high or too low. If the water pressure is too low, it could cause the sprinklers to not water the correct distance, or some sprinklers to not water depending on how many heads you have attached to the zone. If…Read More »
If you are using multiple B-hyve timers, and want to use smart watering with each of them, then you will need to adjust the smart watering program for each device. In order to do this, you will need to add a “Suggested Start Time” for the smart watering on your B-hyve devices. Be sure to…Read More »
This article will show a 2 Outlet Hose Faucet Timer, but these steps will work for any of our hose timers. Leaking/ Will Not Close Troubleshooting Before we get started, here are a couple of very important tips when using and caring for your timer. ***It is important to remember to make sure your Timer…Read More »