If you have just purchased a B-hyve timer/Hub or our B-hyve Flood Sensors and Hub and have any questions or need help with setting up your new B-hyve products then this guide will help. First things first, you will want to download the B-hyve app on either the App Store or Google Play Store depending on which phone/tablet you are using…Read More »
Tag Archives: programming
In this article we will go over how to create a program for your timer in the B-hyve app that has a Start and End date. This can be very useful if you want to have a program only run for a select amount of days or months and then turn itself off automatically. The…Read More »
Want to take full advantage of your underground sprinkler timer? This may be the guide for you. What are stations and zones? A station or zone refers to a group of sprinklers attached to the same valve. Your timer will turn on the valve to let water flow to the sprinklers in that zone/station. The…Read More »
This article will go over the total amount of start times our B-hyve timers will allow based on the device. If you have the following devices then you will have 16 start times per day, as each of these devices has 4 programs (ABCD), and each program can have 4 individual start times – B-hyve…Read More »
Sometimes you may have a program you don’t want to use any longer. Deleting the program is a fairly simple process. To delete a program Go to the “Programs” page. You’ll now see the programs page with all of your active programs. Tap “Saved Programs” to get an entire list of all of your programs. Locate the…Read More »
To add a zone to the timer, you first need to wire the valve into the timer. Each valve should have two wires coming from the solenoid. One wire from the valve will go into the common terminal, and the other wire will go into the numbered terminal. In the app, go to the “Zones” page. Tap “Edit”…Read More »