To set up Custom Watering Custom programs can be found from any screen with the bottom navigation bar. Tap the “Programs” navigation button. You’ll now see the programs screen with three empty program slots (A, B, & C) or any saved custom programs if previously set. Press “Tap to set” to begin creating your custom programs. …Read More »
Tag Archives: B-hyve
In this article, we will help with reconnecting your B-hyve devices once you’ve installed a new router/made any changes to your router settings. For all of our devices except the B-hyve XR, you’ll need to make sure that your new router can broadcast a 2.4 GHz band separate from any 5 GHz network – otherwise,…Read More »
There can be a few different possible causes when this issue occurs. First, we need to be sure the sprinkler wire from the valve(s) is fully inserted in the terminal. You will want to remove the wire and reinsert it. If your terminal uses screws, please make sure they’re tightened. To ensure the wiring is…Read More »
The “No AC” message means there is no electrical power flowing to the B-hyve device, which could be due to no connection, a bad connection or a power outage. If you know the rest of your home is receiving power, then we can cross power outages off our possible cause list and move on to…Read More »
If your B-hyve Device is not keeping time, using an incorrect time or your programs are turning on at random times, then this article should help with that. There can be a few steps that can help address this issue. First, we’d recommend power cycling the B-hyve device. To power cycle, simply unplug the device…Read More »
If you have a B-hyve Hose Timer that is not working, this guide should help you. This is often the result of water intrusion. While it is connected to a source of water, the Hose Timer is water-resistant, not waterproof. We do recommend immediately removing it from the faucet should it become non-responsive, opening the…Read More »
To help address this, I’d like you to try removing the battery tray, wait 30 seconds, and then reinsert it, making sure the tray is fully inserted. You’ll want to complete this step with the faucet turned off or the hose timer removed from it, to ensure water doesn’t get into the body of the…Read More »
I understand that water isn’t flowing from the Hose Timer even though a program is running. To help address this, I’d like you to try removing the battery tray, wait 30 seconds, and then reinsert it, making sure the tray is fully inserted. You’ll want to complete this step with the faucet turned off or…Read More »
To turn your Sprinkler system off for the winter, you will want to blow out the lines first, to remove any water and prevent freeze damage. We recommend contacting a professional to do this. Here is a video on steps you can take without blowing out the system If you have a B-hyve device, it…Read More »
If you are in an area that freezes during the winter months, or if you don’t need to water at this time, we recommend removing all Hose Faucet timers, hoses, and any hose attachments, and storing them in a warm, dry location during the winter months. You’ll also want to drain them of any water….Read More »