Tag Archives: Program

How to Program Your Hose Faucet Timer

To set up Custom Watering Custom programs can be found from any screen with the bottom navigation bar. Tap the “Programs” navigation button. You’ll now see the programs screen with three empty program slots (A, B, & C) or any saved custom programs if previously set. Press “Tap to set” to begin creating your custom programs.  …Read More »

Easy Dial Timer Programming Videos

This article is full of videos pertaining to the Orbit Easy Dial Timer. Each video has a brief description of what the video goes over and should help with any programming questions you may have. In this video, we run through how to program your Orbit Easy Dial timer with basic programming: This video is…Read More »

Easy Dial Programming

Here, we’ll walk through the programming of your Easy Dial Timer. If you prefer to watch a video, click here Make sure your timer is plugged directly into a live wall outlet. Programming is achieved by rotating the dial counter-clockwise and lining up the desired section on the dial with the right-pointing arrow button.   Let’s…Read More »

Easy Set Logic Timer Programming Videos

In this video, we explain some of the vernacular and meaning behind general programming terms: In this video, we run through how to run your Orbit Easy Set timer manually without having to alter any scheduled programs: In this video, we run through how to utilize multiple start times in our Easy Set underground timers:…Read More »

How To Program Your Easy Set Logic Sprinkler Timer

Here, we’ll walk through the programming of your Easy Set Logic Timer. (If you have one of our B-hyve versions of this timer, please click here for help with programming your timer) If you prefer to watch a video, click here Make sure your timer is connected to electricity. It will either be plugged directly into a live wall…Read More »

How To Program Your XR Indoor/Outdoor Smart Timer

Need to program your timer but you’re not sure where to start? Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest of your stations. For example; Your grass may need to…Read More »

How to Program your B-hyve Indoor/Outdoor Controller

Need to program your timer but you’re not sure where to start? We’d be happy to show you how to create programs. Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest…Read More »

Indexing Valves

If you have an Indexing Valve and are wanting to use it with a B-hyve timer or an Orbit Underground Timer, then this article will help with wiring and programming. There are two methods to wire and program an indexing valve – Multiple Start Time Method – Jumper Wires Method * Please note that if…Read More »

Can You Run Different Programs on the Same Day? – Underground Timers

Our Underground timers have between two and four programs that can be set to run at different times. You can have all of them set to run at different times for different amounts of time. You cannot have more than one zone/station running at the same time. The system will prevent this from happening to…Read More »

This website uses cookies to ensure you get the best experience.