In this video, we will be onboarding an 8-station Orbit B-hyve XR sprinkler timer to the Orbit B-hyve app. You will want to connect your valve wiring to the timer before we begin onboarding. It can be helpful to take a picture of your previous wiring if you are replacing your sprinkler timer. In…Read More »
Tag Archives: XR
If you are looking for help with finding the MAC address for your B-hyve device, then this article will help you. Each of our B-hyve devices has a unique 12 digit MAC address associated with them. For each of the different devices, this MAC address is located in a different spot. The MAC addresses on…Read More »
If you are looking for help with programming your Orbit or B-hyve timer, then this article should help. This article contains links to both our Orbit and B-hyve line of timers and will help you in programming your device to fit your needs. Please check below to find an article to fit your needs. *Note:…Read More »
There are several different B-hyve devices, and not all of them use the same method to factory reset. This article will show you how this is done for each device. Factory resetting is very important when initially pairing your device to the B-hyve app, but it can also assist when you have had any WiFi/Router…Read More »
This article will go over several scenarios to help find out what connection issue you may be seeing, and then help direct you to the most relevant article to help identify and solve the problem. If you are saying the following: “I can’t connect to Wi-Fi / Bluetooth” “I’ve changed my Internet provider / Router…Read More »
How to reconnect the B-hyve XR and Indoor Timer when changing routers: 1. In the app, tap My B-hyve then Devices. 2. Tap on the Timer then Update WiFi Settings. 3. The timer will look for available WiFi networks to connect to – If you don’t see your network, tap refresh to try again. 4….Read More »
There are several different B-hyve devices, and not all of them are put into their pairing mode the same way. This article will show you how this is done for each device. Putting your timer in pairing mode is very important when initially pairing your device to the B-hyve app, but it can also assist…Read More »
Need to water your yard, but don’t have your phone handy? This article will help with running your underground B-hyve timer manually. B-hyve Indoor Smart Timer Water All Zones Press and hold the B-hyve button. Release the B-hyve button when the upper right display shows A (for All Stations) and your manual watering will begin…Read More »
If your timer disconnects often, and you find yourself unplugging it to re-connect frequently, this is the article for you. There are a couple of steps you can take that may resolve the issue. First, please download and install the OrbitAssist application on your phone or tablet using the steps found here. Using the OrbitAssist application,…Read More »
Need to program your timer but you’re not sure where to start? Let’s begin. What is the purpose of the A, B, C, and D programs? The different programs would be used if you have certain stations that need to run separately from the rest of your stations. For example; Your grass may need to…Read More »
- 1
- 2